Contact Us
  • 400-022-9917


Surface Profile
current location : HOME PAGE > Coating Inspection> Surface Profile

Surface profile: The degree of profile on the surface affects a coating’s overall performance and determines aspects such as adhesion, coverage and overall volume of coatings used. If the profile is too large the amount of coating required increases, otherwise there is a danger that the peaks remain uncoated - allowing rust spots to occur. If the profile is too small there may be an insufficient key for adequate adhesion.

Elcometer 224 Digital Surface Profile Gauge

The Elcometer 224 provides the very latest in surface profile measuring technology for measuring profile on either flat or curved surfa...

Elcometer 123 Surface Profile Gauge

The Elcometer 123 Surface Profile Gauge is an easy to use analogue gauge which measures the peak-to-valley height of a blast cleaned surface...

Elcometer 124 Thickness Gauge

The Elcometer 124 Thickness Gauge is used to measure the peak-to-valley height of a surface profile moulded in the Elcometer 122 Testex&...

Elcometer 122 Testex® Replica Tape

The Elcometer 122 Testex® Replica Tape is designed to provide a permanent mould of the surface profile, which can then be measured ...

Elcometer 125 Surface Comparators

These extremely durable surface comparators allow the estimation of surface profile of either grit or shot blasted surfaces. Using the El...

Elcometer 127 Keane-Tator Surface Comparators & Magnifier

The Elcometer 127 Surface Comparators are available in sand, shot or grit surface profiles. Each surface comparator is supplied with 5 pr...
12 next > amount 2 pages,7 records